Can You Update Oontz Xl Software

OontZ Bending 3XL ULTRA update to Version 3.1 firmware is of benefit for the following:

When you are using an Apple Bluetooth source: iPhone; iPad; MacBook Pro, MacBook Air, iMac systems. The firmware version three.1 enables the OontZ Bending 3XL to playback audio from Apple Source devices with more control over the volume levels offering a lower minimum book and more volume level options up to maximum volume.
When y'all are using Samsung and Android smartphones this firmware update fixes issues with dropped Bluetooth connections
Improves performance and reliability of OontZ Wireless Dual Pairing when playing sound from two OontZ Angle 3XL speakers paired together

Please have the following items ready:

OontZ Angle 3XL speaker(s) with power turned OFF and all cables unplugged

Please note : If you lot have a pair of OontZ Angle 3XL speakers delight exist sure to update both speakers.

three.5mm Sound Cablevision
that came with the speaker

USB Thumb Drive with 16Gb or smaller capacity (non included with speaker)

Step one : Download the firmware Nix file named 'firmware_v3.ane.zip' to your hard bulldoze using the post-obit link (Correct-click and select "Save Link As..." to save ): firmware_v3.1.zip

Step 2 : The file 'firmware_v3.1.naught' must be unzipped before copying the contents to the USB Thumb Drive.To unzip the file on a Mac, double-click it. To open up the file on a PC, drag it to the desktop. One time the file is on the desktop, you can double-click to open the zipped file to see its contents. It contains a folder named 'system' within it which you will copy to your USB Thumb bulldoze. Do not copy 'firmware_v3.1.aught' to the drive.

Footstep 3: Elevate and drop the folder 'organization' to your USB Thumb drive. The' system ' binder contains 2 files named "upgrade_XL.bin" and "upgrade.txt".

If you lot experience any issue downloading the firmware files, please contact our back up team past clicking hither

Footstep 4 : Ability on the OontZ Angle 3XL by pressing and releasing the On/Off Button

Step 5 : Open up the Connector Flap on the rear of your OontZ Bending 3XL

Pace six : With your AUX IN 3.5mm sound cablevision non connected to whatsoever other device, insert one end into the AUX IN Jack (figure 6-a), the Bluetooth Indicator Light will turn greenish (figure six-b) and yous will hear the voice prompt: "AUX IN Source".

figure 6-a figure 6-b

Pace 7 : Insert the USB drive into the USB Power Bank connector.The USB drive should remain inserted until the firmware update process is consummate.

Step 8 : Press and Concur the Side by side Track button for 5 seconds (effigy 8-a).
The Ruby-red, Blue, and White lights will light upward solid and remain on for about 30 seconds (figure 8-b)
Of import: Please watch the three lights as the 30 2d time approaches to confirm the following sequence (see blitheness in Figure 8-c below):
All three lights volition flash together 7 times, then simply the Red lite will flash once, then the Dark-green calorie-free turns on and remains solid equally you hear the voice prompt: "AUX IN Source". If the lights don't match this sequence and so the firmware did not update successfully and you will accept to repeat the update process
(click here to outset over)

figure 8-a figure 8-b figure 8-c

Afterwards upgrading the firmware on the OontZ Bending 3XL be sure to re-pair your source device to the speaker. You will need to "Forget this device" from your source device , and so re-pair the OontZ Angle 3XL. Click here for pairing instructions.

Source: https://shop.theoontz.com/pages/updating-the-oontz-angle-3xl-to-version-3-1

Posted by: mccoolregaserig.blogspot.com